Zambeef Products Plc
1. MAINTENANCE MANAGER – ZAMLEATHER TANNERY (1)
The successful candidate will be responsible for the below:
- Monitoring all plant machines & equipment related to Electrical & mechanical, hydraulic, pneumatic, electronics. Also make sure they function properly as per standard operation.
- Maintenance records to be kept of all machines with manual book.
- Ensure optimal use of electricity / water / genset fuel always check procedure of efficient & effective uses of these resources & discuss with tannery manager.
- Create preventive maintenance schedule for all machines in plant & arrange with maintenance staff duties to follow schedule without disturbing production & keep record of preventive maintenance schedule.
- Responsible for up keeping stock records of all maintenance inventory in technical store also monitor & maintain minimum stocks for all spare parts items to avoid delaying fixing machines. Create a stock holding procedure and issuing of spare parts.
- To assign duties to all maintenance staff & follow up to make sure they are doing a proper job without delaying & completing task within good time frame to avoid loss of production.
- Attend the break down for machines reported by production team immediately & assign the team to fix it as soon as possible & hand over the machine to production department.
- Make sure do the assessment of break down yourself & assign maintenance staff to fixing it with proper guidance & detail instructions to complete task.
- Prepare KPI for all maintenance staff & conduct monthly performance evolution of each maintenance staff by checking records of attended break downs by each individual.
- Make sure to order all important imported spares which locally not available for machine with good time frame by using correct service manuals through proper planning.
- Always make sure whatever solution to provide machine fixing must be cost effective & reliable.
- Compressor / genset / boiler make sure to service them properly on time & maintain the records of all properly to prepare monthly report.
- Servicing of all machines at annual “shut down” to be carried out in case it planned then make sure all spares & staff or if need expert then available for it.
- Before performing any maintenance task, take a risk assessment as well safety measurement for that job to avoid potential damages to staff & machineries.
- Maintain the effluent treatment plant all machines, equipment, tanks, drainage channels properly & Make sure all machines & equipment carry out preventing maintenance to avoid break downs, specially Decanter machine.
- Prepare the Job card for each machine & maintain the record of spares consumption for each individual machine in order to understand efficiency & effectiveness of that equipment to suggest replacement plan.
- Other Duties as assigned”
Qualifications
- Grade 12 certificate or equivalent
- Tech Diploma in mechanical
- 5 – 10 years’ heavy industry experience.
- Hydraulic & Pneumatic knowledge,
- Computer knowledge (Excel)
- Electrical & Electronics knowledge will be an advantage
Attributes
- Timely monthly and weekly reporting.
- Strong, conceptual and problem-solving skills.
- Detailed process and analytical ability.
- Strong verbal / analytical reasoning ability.
- Operational and Process excellence.
- Ability to self-manage workload and work independently
2. MAINTENANCE MANAGER – ZAMLEATHER – ZAMSHU (X1)
The successful candidate will be responsible for the below:
- Create a stock holding procedure and issuing of spare parts
- To order correct spares using correct service manuals, building in time delays
- Maintenance records to be kept of all machines
- Servicing of all machines at annual “shut down” to be carried out
- Work to be carried out with health and safety procedures
- Responsible for maintenance of discipline in line with laid down procedure as outlined in the Disciplinary Code and Grievance Handling Procedure Handbook
- Any other duties assigned by Management
Qualifications
- Grade 12 certificate or equivalent
- Tech Diploma in sewing machines
- 5 – 10 years’ experience
- Hydraulic Knowledge
- Pneumatic knowledge
- Ability to work under pressure
- Good communication skills
- Computer knowledge (Excel)
- Electrical knowledge will be an advantage
- Good interpersonal skills
- Required computer literacy levels
Attributes
- Timely monthly and weekly reporting.
- Strong, conceptual and problem-solving skills.
- Detailed process and analytical ability.
- Strong verbal / analytical reasoning ability.
- Compliance, Governance and Ethics.
- Operational and Process excellence.
- Ability to self-manage workload and work independently
- Detail-orientated with the technical aptitude and ability to perform tasks accurately and comprehensively
- Ability to establish and maintain effective relationships with external suppliers, management and all levels of associates.
3. MECHANICAL FITTER – ENGINEERING DEPARTMENT NOVATEK LUSAKA (1)
The successful candidate will be responsible for the below:
- Carrying out daily inspections of the plant in order to ascertain if all machines and equipment are functioning as per normal.
- Repairing work involving stripping, checking, removing / replacing worn out parts, filters, tightening loose belts and nuts and checking general mechanical conditions of same in order to ensure continuous operations and achieve production targets.
- Prepares lists of spares / materials required and submits the same to superior and completes Job Cards reports on all work carried out highlighting work done.
- Adheres to planned maintenance schedules by carrying out servicing/ maintenance work, involving the changing of oil’s, filters, worn out parts, greasing/ lubricating and checking mechanical condition of same in order to prevent excessive wear and tear and enhance prolonged life
- Will be responsible for maintaining the quality and feed safety management system
The Required Qualifications are:
- Grade 12 certificate
- Diploma in Mechanical Engineering
- 3 years’ work experience hands on / Experience in feed mill plant, added advantage
The Required Attributes Include:
- Required computer literacy levels
- Works to an acceptable practice and standard procedures besides technical norms and refers to superior
- Ability to analyse and diagnose defects on plant / machinery / equipment and effect corrective measures
- Ability to work with minimum supervision
- Good interpersonal and communication skills
4. BOILER MAKER – ENGINEERING DEPARTMENT NOVATEK LUSAKA (1)
The successful candidate will be responsible for the below:
- Procuring job requests involving the breakdown of machinery/equipment in the factory, physically checks the same and diagnoses faults to determine cause and extent of damage and material requirements to carry out repairs work.
- Carrying out daily inspections of the planting order to ascertain if all machines and equipment are functioning as per normal.
- Undertake repair work involving stripping, checking, removing, replacing worn out parts, welding and steel fabrication and checking general mechanical conditions of the equipment.
- Adhering to planned maintenance schedules by carrying out servicing /maintenance work, involving the possibility of welding and fabricating steel components and checking mechanical conditions in order to prevent excessive wear and tear and enhance prolonged life.
- Carrying out tests runs of machinery /equipment, repaired, maintained, to determine quality of working Manship prior to handing over the same, to the superior and complete job cards reports on all work carried out highlighting work done. Spares/materials consumption, downtime etc for the attention of the superior.
- Prepares lists of spares /materials required and submits to the superior and completes job cards, reports on all work carried highlighting work done
- Motivates and develops a good working relationship with his colleagues in line with company manpower policies.
The Required Qualifications are:
- Grade 12 certificate
- Advanced Certificate in Metal Fabrication
- 3 years relevant experience
The Required Attributes Include:
- Required computer literacy levels
- Works to an acceptable practice and standard procedures besides technical norms and refers to superior
- Ability to analyse and diagnose defects on plant / machinery / equipment and effect corrective measures
- Ability to work with minimum supervision
- Good interpersonal and communication skills
Candidates meeting the above criteria should submit applications, with detailed Curriculum Vitae and copies of certificates and contact details of three (3) referees and should be addressed to:
THE HR OPERATIONS MANAGER
Zambeef Products PLC
P/B 17, Woodlands
Lusaka or
Email: [email protected]
NB. Internal applicants should get approvals from their Heads of Departments before applying and only shortlisted candidates will be contacted. Zambeef Products PLC values gender diversity in the recruitment process as we promote gender equality.
The closing date for receipt of applications is 31st October, 2022. Only shortlisted candidates will be contacted.